GM World Class Technicians at Con Paulos Chevrolet
Five technicians in the Con Paulos Chevrolet service department in Jerome hold GM World Class Technician status, the highest certification General Motors gives a dealership technician. GM counted just 2,545 technicians holding World Class status in August 2026. Finding five of them in one Magic Valley shop is rare, and it's the best reason we can give you to bring your Chevrolet here.
What a GM World Class Technician is
It's the top of GM's technician ladder, and GM calls it the highest honor a technician can earn. Most techs start as apprentices doing express service and inspections. From there they work through bronze, silver and gold certifications, then earn Master Technician Certification one system at a time.
World Class sits above all of that. To get there, a technician has to hold Master Technician Certification in eight mechanical areas, and pass the matching ASE certification for each one. GM's side of the training runs through its Service Technical College. ASE is the independent industry body, so every one of those eight areas gets tested against GM's standard and against the industry's.
GM marks the achievement with a letter of recognition, a World Class statue and a toolbox medallion. For you, the part that matters is the years of training and testing it took to earn them.
The eight areas a World Class Technician has mastered
Each technician holds GM master certification in all eight of these, plus the ASE test listed beside it. The last row can be gas engine performance or diesel engine performance.
| GM master certification area | ASE test | What it covers on your Chevrolet |
|---|---|---|
| Engine Repair | A1 | Internal engine work, timing components, gaskets and seals |
| Automatic Transmission/Transaxle | A2 | Shift problems, slipping, transmission diagnosis and repair |
| Manual Drivetrain and Axle | A3 | Axles, differentials, transfer cases and four-wheel-drive parts |
| Steering and Suspension | A4 | Alignment, steering components, shocks and struts |
| Brakes | A5 | Brake hydraulics, pads and rotors, antilock brake systems |
| Electrical/Electronics | A6 | Wiring, control modules, batteries and charging systems |
| Heating, Ventilation and Air Conditioning | A7 | A/C that won't cool, heaters, climate controls |
| Engine Performance (or Diesel Engine Performance) | A8 and L1 (or A9) | Check engine lights, drivability, emissions, fuel and ignition |
A tech with master certification in one or two of these is a strong specialist. A World Class Technician has it in every mechanical system on the vehicle, which matters most when a problem in one system shows up as a symptom in another.
How rare World Class status is
As of August 2026, 2,545 technicians held GM World Class Technician status, according to GM TechLink, the publication GM puts out for dealer service departments. That's GM's whole count, not a regional one.
For scale, GM's Technician Excellence Program, which rewards dealership technicians for completing training, had more than 22,000 dealership technicians enrolled as of May 2025. World Class holders are a small fraction of that number.
Con Paulos Chevrolet has five. When a pickup from Gooding or a crossover from Twin Falls comes in with a problem another shop couldn't pin down, it lands in a building where five people have each passed master-level testing on every mechanical system GM builds.
World Class status has to be re-earned every year
A World Class Technician has to finish 100% of the training GM assigns in each certified area by December 31, every year. If a tech misses that deadline, the master certification in that area expires 30 days later, and World Class status goes with it.
That rule is why the title means something. Chevrolet changes vehicles every model year with new software, new modules and new powertrains, and GM's training list changes with them. A technician who earned World Class years ago and stopped training can't keep it. The five techs at Con Paulos hold it because they've kept up.
GM is raising the bar in 2028
Starting January 1, 2028, GM will require 10 of 10 master certifications for World Class status, up from eight. The new list makes both Engine Performance and Diesel Engine Performance mandatory and adds Advanced Technology Vehicle, GM's electric vehicle certification.
GM gave two reasons: diesel engines are spreading across its lineup, and electric vehicles are a growing share of what it sells. Of the 2,545 current World Class Technicians, GM says 561 already meet the new standard. GM has given the rest until 2028 to finish the extra training.
Both additions fit the Magic Valley. Duramax diesels pull stock trailers and haul feed on farms and ranches across south central Idaho, and Chevrolet now sells the Equinox EV, Blazer EV, Silverado EV and Bolt. The higher standard means GM's top techs will be certified on the diesel and electric trucks and SUVs people here actually drive.
What World Class training means for your Chevrolet
It means a faster, more accurate diagnosis. A current Chevrolet runs on dozens of networked control modules, and a fault in one can trip warnings in three others. Swapping parts until the light goes off costs you money. Tracing the fault to its source takes training in electrical systems, engine performance and the system that's actually failing, all at once.
That's the skill set World Class certification tests. A technician certified at master level across every mechanical system can see how a charging problem affects transmission shifting, or why a suspension sensor is setting a brake warning.
Jobs where it makes the biggest difference
- A check engine light that keeps coming back
- Electrical problems that come and go
- Harsh, late or slipping transmission shifts
- Duramax diesel power loss or drivability problems
- Four-wheel-drive or transfer case faults
- A/C that won't cool or won't stay cold
- Warning lights with no obvious cause
- A vehicle another shop couldn't fix
Why Jerome drivers choose Con Paulos for service
Five World Class Technicians is the short answer. With five on one team, the toughest diagnostic jobs at Con Paulos don't all wait on one person's schedule.
The rest of our team trains on the same GM curriculum, working through the same certification ladder those five finished. Routine work like oil changes, tire rotations and brake service gets done by technicians trained on Chevrolet's own procedures, with genuine GM parts from our parts department.
We service Chevrolet cars, trucks and SUVs, from a Trax to a Silverado 3500 HD, along with fleet and work trucks that can't afford a second trip in. Customers come from Twin Falls, Burley, Gooding, Hailey and the rest of the Magic Valley.
Book a visit with our online service scheduler or call the service department at 208-595-4627. We're at 251 East Frontage Rd S in Jerome; check our hours and directions before you head over, or see everything we offer on the service department page.
GM World Class Technician FAQ
What is a GM World Class Technician?
It's the highest certification GM awards to a dealership technician. A World Class Technician holds GM Master Technician Certification in eight mechanical areas, including engine performance or diesel engine performance, plus the matching ASE certification for each.
How many World Class Technicians work at Con Paulos Chevrolet?
Five technicians in our Jerome service department hold GM World Class Technician status.
How many GM World Class Technicians are there?
GM TechLink reported 2,545 technicians with World Class status in August 2026.
Do World Class Technicians have to keep training?
Yes. They must finish 100% of GM's assigned training in each certified area by December 31 every year. If they miss it, that certification expires 30 days later and they lose World Class status.
What changes for World Class Technicians in 2028?
Starting January 1, 2028, GM will require 10 of 10 master certifications, including both gas and diesel engine performance and Advanced Technology Vehicle, GM's electric vehicle certification. GM says 561 of the 2,545 current World Class Technicians already meet that standard.
How do I schedule service at Con Paulos Chevrolet?
Use the online service scheduler on our website or call our service department at 208-595-4627. We're at 251 East Frontage Rd S in Jerome, Idaho.